BeatRippa the Blogging BeatMaker

My Thoughts on music production and hip-hop

Top 3 Ways to Finally Finish Music/Beats

Jun 302017

Hi everybody,

If you haven't checked out my previous blog entry - "Top 3 Causes of Unfinished Music/Beats", I recommend that you read that first here.

Now that we've identified some of the causes of unfinished music, let's try to find some solutions.  I'll be going through this point-by-point, as in my previous entry.

 Cause #1 - Too many options

undefined

Solution: Place limitations on yourself

 Limitation #1 - Equipment/Sound Selection

With modern soft samplers, VSTs, and DAWs, anything is possible.  While this can definitely be positive, it can also create a challenge for some.

- "Where to start?! I have so many sounds/effects to choose from!"

For some, the solution may be to invest in some hardware.  No, I'm not suggesting that you totally ditch your laptop for a piece of 90s nostalgia, but adding a piece of hardware to your setup might help your workflow. Additionally, limiting yourself to a certain group of sounds can not only speed up your selection, but it also spark creativity.

   Example #1: Instead of having 5 different VST synthesizers, buy one hardware synth and learn it inside and out. Instead of bouncing around from plugin to plugin searching through all of the presets, you'll have one go-to piece that you understand well.  You can always have the VSTs as a back-up, and you'll probably have a better understanding of synthesis than you did before.

 Example #2: Let's say you have a 10 different sample packs, each with 30 Kicks/Snares/Hats, etc. That's 900 sounds to audition, when you only want to use three! Instead of browsing though each sample pack and randomly listening to sounds, limit yourself by making a song using only one sample pack.  Not only will it speed things up, but you'll also get to know your favorite sounds in each sample pack.  For the next track, you can try out a different pack.

 

Limitation #2 - Time

It's always tempting to delay the release of your music until it's perfect.

"No, the song just isn't there yet. I'll release it once I'm happy with it." 

The result? Usually it's a song just sitting on your hard drive waiting to be forgotten.

 A better approach would be to give yourself a deadline.  

     - If you're self-disciplined, you can simply tell yourself - "By the time I go to bed on Sunday, this track will be uploaded." 

     - Alternatively, if you need an extra push, send a message to one of your peers and tell them that you're going to send them your new track by a certain time. "Hey, I'm putting the finishing touches on my new track - I'll send it to you this weekend. I'd appreciate any feedback!"

If you're like me, this added pressure could help you sit down and focus on fine-tuning the track instead of taking the easy route and postponing it to a later date.  

Even if you're still not happy with the track, at least it's able to be heard by others who can give you some valuable feedback.  You can always tweak the song later, but at least you've gotten over that first hurdle and uploaded it for others to hear.


Cause#2 - Perfectionism

undefined

Solution: Upload a video of the song in progress/get a second pair of ears

Tip #1  Upload a video of the song in progress

Although having high standards for yourself is a good thing, it can also prevent you from releasing your music.  When I first started uploading songs to Youtube, I was stressed because once I uploaded something, there was no way to update it. If I decided to change the mix, for example, there was no way to do so without removing the song and then reposting it. This caused me to slow down, because I wanted to ensure everything was perfect until I uploaded it.  

Instead of uploading the final song, upload a "working draft" filmed with your phone.  By doing this, you accomplish a few things:

1) Most importantly, people are finally able to hear your product

2) they can give you some feedback/encouragement which can help you finish the song

3) a casual recording of you making the track humanizes you and connects you with your audience

4) since both you and your audience know that it's unfinished, it takes some pressure off of you.

Whenever you do finish the song, a link can be posted to the final version on your site.

 

Tip #2 - Get a second pair of ears

When you're the only one who hears your song, you begin to second guess everything after hearing it so many times.  In this case, having another person listen to your music can really help you finish your track. Ask a friend, colleague, or upload an unfinished mix to the internet as I mentioned above.

If you're having problems mixing, perhaps it would be worthwhile to pay somebody to mix a few your tracks in order to get a second opinion. Be sure to ask them what they did, however, so you can try to do it yourself in the future.

Thanks for reading, and please stay tuned as I'll be updating this blog entry in the near future. Please comment!

Peace!

BeatRippa

 

 

Top 3 Causes of Unfinished Music/Beats

Jun 022017

 

When you open your "Projects" folder, do you see a long list of unfinished songs?

These all have great potential, of course, but they’re just not QUITE there; something’s missing. I know many artists (including myself) whose albums/beat tapes have taken YEARS because they just can’t get everything right.

In this multi-part series, let’s look at some of the causes of this. In later parts, we’ll examine some resolutions.

Cause #1: Too many options

When I first started making hip-hop music in 2003, here was my setup:

undefined
• A cheap SOTEC computer with 256 MB Ram/20 GB Hard Drive (anybody remember these laptops?)
• Fruityloops 3
• Cool Edit Pro for slicing samples
• About 20 different drum samples

Despite these limitations, I was making music at an extremely fast rate, and I was totally satisfied with my results.

Let’s compare this with now:
• A MUCH more powerful laptop
• Native Instruments Maschine
• several DAWs (Ableton Live, Pro Tools, Bitwig, etc.)
• hundreds of gigabytes of VST effects and sample banks

What’s the result? A folder full of unfinished projects.

In my opinion, the problem here is that there are just way too many choices available. It’s great to have some selection, of course, but there should be a limit to the amount that you have.

When I sit down to make a track, I always ask myself, "Which sound to use?" With so many kicks, snares, pianos, strings, which one? Once I’ve finally narrowed it down and chosen the sounds (which I’ll probably want to change later), I get to the mixing stage. Which compressor to use? Limiter? EQ? Eventually, I might just move on to another track or give up entirely because I can’t make up my mind.

What I find is that I’ve moved from being ACTIVE to REACTIVE. In other words, during active production, you take whatever you have and then mold it into what you want. If you’re reactive, you play all of the samples, or go through all of the presets, and just wait for something to “jump out at you”. Not only is this time-consuming, but it has an impact on your creativity.

Cause #2: Perfectionism

Related to the previous cause (Too many choices), some artists may think:

“Since I have so many options, there must be a better kick or snare than what I have now. Perhaps I should search for a better sound or buy some more sample packs?”

Although this might be a good idea if you are truly limited and don’t have good sounds, most of the time this second guessing does more harm than good.

I believe that the internet has fueled this problem. It's common knowledge that once something is uploaded to the internet, it’s there forever. This could cause you to wait until you have the PERFECT mix. The problem with this is that very few people get to this point.

Uploaders may also be afraid of receiving harsh criticism from strangers or their competition. Instead of only getting feedback from friends, family, or other trusted people you know, you're now uploading your music for the world to judge. The fear of criticism from strangers can cause you to save your music until it's "good enough."

Lastly, our perfectionism may stem from comparisons of our music to what we hear on the radio. If our mix doesn’t have the same quality, we think we need to wait until it does. It’s important to remember, however, that the first mix of these tracks on the radio didn’t sound like the final product. They were mixed, mastered, and fine-tuned by industry professionals. It’s tough to equal that if you just have a bedroom studio.

Don't feel like you're the only one feeling like this; here's a Rolling Stone article on Bruno Mars’ struggle with perfectionism: Click here

Cause 3: Impatience

 

undefined

 

You probably recognize this face...You've just heard a hot sample, and you rush to your MPC/laptop to get started making a soon-to-be classic.

As a music artist, one of the most exciting moments is at the beginning of the creative process. The thrill of creating something original is something we all find addictive. Once we get past that original spark, however, sometimes it’s difficult to continue. As you encounter roadblocks along the way, your excitement gradually shifts to despair.

After tweaking sounds, effects, and editing patterns for a while, you might think: 

“This beat will never be good enough” or “I’ll never find the right sound.”

As a result, you start a new track, to regain that initial thrill, and forget about the old one.

Although it can be useful to take a break so you can “reset” your ears, it’s not a good habit to always abandon projects halfway through them so you can start new ones. If you do this often, before you know it you’ll have a long list of unfinished projects which will just cause you to feel even worse.

Have any of you had the same experience? Let me know in the comments section; I’d love to hear your thoughts.

In further parts, I’ll look at some resolutions to these three causes. Thanks for reading this, and stay tuned for more.

-BeatRippa

Atom

Blogkit by Soundgine